RAD Data comm LA-210 Instrukcja Użytkownika Pobierz pdf (Strona 143)

User’s Manual Chapter 6 Security Management

RV-EMS/NGN LA-210 Configuring SNMP 6-5

³ To view or specify the management station IP address to which to send traps:

1. In the LA-210 View window, select the system.

2. On the menu bar, click Options > Manager List.

Figure

6-2. Manager List Dialog Box

3. Fill in the fields, as described in

Table

6-2

4. Change the IP addresses, as required.

5. To configure that the specific manager will not receive traps from the device,

select the relevant Mask Traps check box adjacent to that address.

6. To configure that the specific manager will receive traps from the device,

clear the relevant Mask Traps check box adjacent to that address.

7. Set the UDP Trap Port.

8. Click <Set> to implement the changes.

Upon set, the NMS checks the IP Address. If it is 0.0.0.0 and Mask Trap

check-box is checked, the following error-message appears in the status

bar: “Illegal IP Address when Traps are Masked”.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 157 158

Brak uwag

RAD Data comm LA-210 Instrukcja Użytkownika Strona 143